21 |
How to change the Intelli-Site base port number
View products to which this article applies. Introduction Given the nature of TCP/IP, it is possible that two programs may attempt to use the same ports to communicate over. This conflict can cause many problems. Every effort has been made to prevent this… |
22 |
How to change the Text to Speech properties for a User
View products to which this article applies. Introduction Intelli-Site provides Text to Speech. Some users need it some don't. It can be enable/disabled on a user by user basis and the voice used can be selected. Procedure The Text to Speech properties for… |
23 |
How to create Scheduled Events
View products to which this article applies. Introduction At times a user may want to schedule a door to unlock or an input to be disabled as a one-time event. Since version 3.9.50, a pre-built Event Scheduler screen has been included with the default project… |
24 |
How to export a panel to use as a template when adding other panels
View products to which this article applies. Introduction Sometimes the setup of a panel and its programming is complicated and there is at least one more panel with similar programming. It would be nice if there was a way to use this panel as the template… |
25 |
How to Import Cards and Cardholder Data into Intelli-Site
View products to which this article applies. Introduction Intelli-Site has a feature to import cards and cardholder data so you don't have to do it all by hand. This feature allows the user to import cardholder data from any properly-formatted delimited file.… |
26 |
How to Quickly Change the Settings of Several Similarly Programmed Screen Objects
View products to which this article applies. Introduction When designing and programming screens and screen objects, you will sometimes need to modify the appearance of several screen objects that are similarly programmed. You may want to: Make them the same… |
27 |
How to Set Up email Notification
View products to which this article applies. Introduction The Email Notification feature of Intelli-Site can be used to send email notification when an I/O Point has reached a defined state. Intelli-Site will send the notification email to the email addresses… |
28 |
How to set up Intelli-Site Workstation on a Remote Computer
View products to which this article applies. Introduction For many installations, it is necessary to access the Intelli-Site Server from a remote computer. Procedure The user account on Windows that will run the Intelli-Site Workstation must have Admin Rights… |
29 |
How to Setup multiple Intelli-Site Servers to Communicate with Each Other
View products to which this article applies. Introduction Intelli-Site Enterprise Operations is a mechanism that allows Servers or redundant Server pairs to communicate with each other through a remote link. This allows companies and organizations with multiple… |
30 |
How to setup up Redundancy
View products to which this article applies. Introduction Intelli-Site Servers can be configured to operate redundantly; that is, to have a “Master” Server online with a “Slave” Server standing by. In the event of a Master Server Failure, the Slave… |
31 |
How to Setup Using Keypad for Entry
View products to which this article applies. Introduction A keypad can be added to the Compass and MAC hardware. This would allow a reader to require both a card and PIN, allow the cardholder to enter the card number manually, or to set an entry code specific… |
32 |
Installation and Usage of the DriveMonitor script.
View products to which this article applies. Introduction The DriveMonitor script polls the Windows Disk Manager of one or more computers to determine the amount of free space available on each of its fixed drives. In the event the available free space on… |
33 |
Is Intelli-Site a 32-bit or 64-bit application?
Intelli-Site is a 32-bit application. It is tested and supported in the 64-bit versions of the Windows 7 and Windows 2008 R2 operating systems. That being said, some integrations, mostly DVRs, are not available in 64-bit operating systems because the API… |
34 |
Multi Door Interlocks (Sally Port) With 32I and 16R
View products to which this article applies. Introduction How to create a multi door interlock Procedure Note: Communication between panels is done only with General Points. Example one - 32 or less inputs on the same panel : All inputs are on the same panel.… |
35 |
OPC Configuration for Integration With Intelli-Site
View products to which this article applies. Introduction OPC is a software interface standard for communicating with industrial hardware devices using Windows programs. OPC is a client/server implementation. The OPC server software converts the hardware… |
36 |
Quick and Easy Basic ES Project Programming
View products to which this article applies. Introduction The thought of programming a project can be intimidating if it is the first time or if it's been a while since attending training. But in reality, Intelli-Site has been written to make project programming… |
37 |
Quick and Easy Intercom Station Programming
View products to which this article applies. Introduction Programming intercom Master Stations and Substations can be a tedious operation. There are a few tricks and tools built into Intelli-Site that make this process a bit easier and more efficient. Specifically,… |
38 |
Quick Start Guide for Installing OSSI Global Series Drivers
View products to which this article applies. Introduction OSSI's Intelli-Site Global system includes both hardware and software, specifically the MAC-4R Series of panels, the drivers necessary for communicating with the panels, and the Intelli-Site software… |
39 |
Release Notes 3.9.61
View products to which this article applies. Overview This article contains the release notes for Intelli-Site v3.9.61. The following sections describe the release in detail and provide late-breaking or other information that supplements the main documentation.… |
40 |
Release Notes 3.9.62
View products to which this article applies. Overview This article contains the release notes for Intelli-Site v3.9.62. The following sections describe the release in detail and provide late-breaking or other information that supplements the main documentation.… |